17003630961762575092

Protect Hardwood Floors with Rug Pads

People often tell stories about their hardwood floors getting damaged due to the usage of rug pads. In order to avoid such damage, proper precautions must be taken. Moreover, the selection of rug pads must be made according to the floor types of your home.
Having hardwood floors is an investment to make for your home and in order to protect that investment; you should place rug pads underneath the rugs so that the life of your rugs is prolonged as well as the life of the flooring. Make sure that the rug pads are made up of such fibers that do not damage your flooring.

Rug pads are used to maintain your rug pads. They add softness and comfort to your rugs and keep them firm as they prevent people from slipping. They also prevent the finish of the flooring from scratches. One common mistake that people make with hardwood flooring is that when it is new, they should wait for at least two weeks for the finishing of floors drying and afterwards covering the space with furniture etc. If the floors are covered immediately after the polishing, the chemicals from the polish could react with the fibers in the rug pads which could harm the hardwood floors.
Hardwood floors could also be damaged if cheap rug pads for hardwood floors are bought on sale not knowing the material from which they are made up. Some rug pads are of low quality and could ruin the hardwood floors after a while they are placed under the rugs or carpeting spaces.
If the flooring has polyurethane and vinyl rug pads are used on it, the rug pads will stick to the surface and after a while it will leave stains which will be difficult to remove from cleaning.
There are different types of rug pads available in the market ranging from natural rubber rug pads, felt rug pads, polyvinyl rug pads and recycled rug pads. You have to be extremely careful with the selection of rug pads as there are also substandard rug pads available in the market. You must make sure that the ones that you are purchasing should be synthetic and must be replaceable through exchange if they turn out to ruin the flooring of your house.
234413_hardwood_flooringEven hardwood flooring has three different types which are as the following:-
•    Hardwood Floor (Engineered)
•    Solid Type
•    Hardwood Floor (Exotic)
One should not compromise on the quality of the rug pads for hardwood floors even if you have to pay a higher price for it. At least it would be more beneficial in the longer run. If a good quality rug pad is bought, it would not harm the expensive flooring of the house. However, if a poor quality rug pad is used, it could damage the flooring and you will have to spend more money on flooring afterwards.

17003630961762575092

Essentials to Take Care of Your Area Rug Pad

PremeireIt is not possible not to have accidents when kids are around. Or have a pet that would be careful with your rug. Or have a party that does not have a clumsy guest. When faced with such situations, accidents occur and then you are met with the difficult part: the removal of any sort of spots or stains and spills. These stubborn stains tend to be one of the most critical areas of maintaining a rug or carpet.
Thus, when we talk about rug/carpet care, the best option is to keep it simple. In fibers there is natural lanolin that gives natural staining repellency. However, maintenance of rugs is basically much easier to do: simple regular vacuuming, occasionally rotating the rugs and cleaning the spot immediately are few of the simple steps that will take care of your rugs.
Below are the few essentials while take caring of your area rugs:


Rug Pads: Underlay thick rug pads will keep your rug stable at a place while giving cushion to the walking feet. It also provides airflow that decreases any sort of moisture that has been built between the rug and the floor, thus increasing the life span of your rug.
Sunlight: Rugs thoroughly experience the testing of color fastness. However, direct sunlight or a constant one can fade colors of fiber over a period of time. In order to maintain the colors of your rug for a longer time, it is better to keep your area rug in a space that filters the sunlight through window coverings. It is also suggested to keep your area rug rotating periodically. This will make any areas that are fading less visible or noticeable to the naked eye.
Cleaning: This is one of the very important steps to do while maintaining your area rugs. A regular vacuum cleaning is an essential step. While vacuuming, start slow so it gives the machine ample time to lift the dirt from the rug.
Occasionally, vacuum the rug pad as well, especially the thick rug pads because at times the dirt actually gathers underneath after being filtered through the area rug. Also, it is better not to apply the beater bar as it will decrease the possibility of loops or ends that may be dragged by the rotating brush. If you find small pieces of loose fiber on your rug or carpet, there is no need to either get worried or panicky about it because the first few times of vacuuming will bring up little shedding which is normal.
Superior-Premium-Felted-Reversible-Dual-Surface-Non-Slip-Rug-Pad-76x96-P16189639Make sure you clean your rugs at regular intervals instead of waiting for the rug to be heavy in soil and dirt. This will actually increase the life span of your rug, resulting in the return of the investment you made on it.
To conclude, proper maintenance of area rugs improves the atmosphere as well as appearance of home interiors.

17003630961762575092

The process used to manufacture felt

Introduction

Today, most fabrics are either knitted or woven.
Woven fabrics take almost 60% of the total apparel and textile. However, textile goes beyond knitted and woven
fabrics in reality. Everything actually begins from felt. Felt is a special material that needs neither
the sophisticated knitting technology nor the weaving technology.

The history of Felt

Felt is probably the oldest fabric known by man. It came before weaving and knitting. Felt was made very easily by the ancient man because
it did not require weaving or knitting for its production. Some ancient felt
was found in one of the frozen tombs that belonged to the nomadic horsemen that
lived close to the Siberia Tiai Mountains. The felt is dated back to around
700BC. The tribes that were associated with
this felt used it to make saddles, clothing and tents. According to the
Legends, St. Clement who was supposed to become the 4 th bishop of
Rome during the middle ages was the one who discovered the process of making
felt by accident. It is said that he
decided to stuff his sandals using tow (linen fibers or short flax) with the aim
of making them more comfortable. St. Clement later discovered that the pressure
from his feet and the moisture from ground dampness and perspiration matted
these fibers together to produce cloth. When
he became a bishop, he decided to find workers who will help hi develop his felting
operations. He later became the patron saint
for the hat makers. This people extensively utilize felt up to today.

Methods used to manufacture felt

There arebasically two methods used to manufacture felt fabrics:

1. Wet Felting
(also known as traditional felting)

2. Needle- felting (also known as dry felting)

Wet Felting

This process utilizes the inherent nature of animal hairs such as wool. This is because
these fibers have scales that are directional in nature and have knocks in them
too. When exposed to friction, their properties
make them react. This phenomenon is referred to as felting. This tends to work very well with wool fibers because
their scales easily curl and bond to form cloth when aggravated.

The raw materials used

Wool is the main raw material used to produce wet fitted fabrics because it grips and mats
easily. A synthetic fiber is also used
in the process to give the felt some resilience. It is not possible to turn synthetics into
felt using wet felting. However, they can
be felted when they are combined with wool. Typical combinations of fibers
include wool and nylon and wool and polyester.

Cheaper felt (also know as artificial felt) that is produced using the wet method usually has
30% wool combined with artificial fibers. This is the minimum amount of wool need to
hold a given fabric together. Other raw materials that are used in this process
include sulphuric acid, steam and soda ash. Sulphuric acid helps in thickening while soda
ash is used to neutralize the sulphuric acid.

17003630961762575092

Durability of your carpet is depending on the padding

When people think about decorating a room, they usually visualize various accessories and small details that will make a room look better. However, when focusing just on furniture people tend to forget that the room will look plain, empty and cold no matter how much furniture and details you put in it if there is no rug on the floor.  That’s why it is also important to carefully select something that will fit with the rest of the decorations and furniture. In my private house I use to own several carpets which were more for the wall then for the floor, several smaller gifts from other countries, mostly handmade. I enjoyed collecting small carpets and usually that was the only thing which I knew about them, as I said, their purpose was mainly for display. Several years back I got married, and my wife and I decided to move to a bigger establishment and spend couple thousand dollars more on the interior, which would combine my hobby with her ideas, so we ended up with five beautiful carpets. To my surprise, we found out that the padding below them plays a big role in the whole furnishing process.


When it comes to choosing bedroom carpets and rubber rug pads for them, the rule which has to be followed is this: the carpet together with the rugged pads must be large enough to outspread further than the sides of the bed at least twelve inches when it comes to twin bed and at least eighteen inches for king-sized bed. As these numbers are the absolute minimum, you can choose to go bigger, but one should know that there is such a thing as a “too big carpet” for the bedroom, meaning the carpet mustn’t cover the whole room, and that there should be sufficient area which isn’t covered with floor carpeting. If you like to inject fun and playfulness into the walls of your home, choose carpets that have unusual forms, colors and patterns.
If you would like to have your carpet as long as you can, then besides inesting in to a rubber rug pad, it would also be smart to check out from what the carpet is made of. Wool is considered to be the most durable material and most quality rugs and carpets are made from this natural fiber. In Tibet and New Zealand sheep tend to produce more lanolin, which is why most high quality woolen yarns come from those areas. Silk is often the material used to mix the design of a quality rug, because this fabric tends to reflect sunrays thus giving it a shimmering look. Cotton, grass fibers and synthetic fibers are also used to endure the lifespan of the carpet and most customers buy them for high traffic rooms, like hallways or living rooms.

17003630961762575092

Safest Non-Slip Rug Pads

Durahold rug pads vary in qualities and kinds. Choose yours based on if they are needed for tiled, marbled or hardwood floors. They are effective in forming a protective layer, securing both the rug and the floors. The arrangement of the strands allows them to form naturally induced vacuums between the carpets and the floors. This vacuum ensures the rug to securely stay in its place. Your house can be turned into a damage proof, waterproof and pressure resistant area. This can help you protect yourself, your loved ones and your valuables.
The overall arrangement of these durahold rug pads is adjusted to enforce its non-slip quality. Their thickness changes in inches and density in ounces depending on what extent you require the non-slip quality. This thickness is also directly proportional to whether you require the padding for an area rug or for an entire room’s carpet. Non-slip rug pads do not incorporate any glues, pastes or chemicals in their manufacture. So when installing them you need not worry about them damaging your exquisite Persian rugs and freshly polished hardwood floors. They provide a strong connection between the rugs, carpets and hardwood floors because of the detailed non-slip arrangement that has been engineered specifically.
Non-slip durahold rug pads are available in several materials; you can choose the one that will complement the overall appearance of your home. You can also make the pick depending on the floor type and the area for which the padding is required. If your rug pad has to be placed somewhere outside the house, you can go with a cheaper quality rug pad.  However, for inside the house you should pick an expensive pad to make it last longer and for maximized comfort and protection.
If you have been contemplating buying durahold rug pads to line your rooms, kitchen, bathrooms and the patio, following are the options divided into two basic categories:
-Non-Slip Rug Pads
-Textured Rubber Non-Slip Padding


super-lock1optimized_69Such rug pads do not have a smooth surface that would otherwise be found on regular rug pads. These have been manufactured in such a way that the surface is comparatively coarse. This surface provides glue like action. The rough tentacle like structure of the surface clings to the rug in a strong and interwoven way. This solidifies the connection of the rug and the floor ensuring the rug to stay in its place.
The plus point about using such rug pads is that they are damage free. The union formed between the rug pads and the rug and hardwood floor is not triggered by any chemical. The frictional force is caused by the differing textures of both items in contact. This is why, whenever you remove the rug pad you will notice how well the polish of your hardwood floors was maintained. Above all, these also maintain the integrity of your expensive and fancy rugs. Their installation and removal is easy and hassle free.
If you have tiled or marbled floors, this need not be a particular choice of padding for you. However, if you have hardwood floors, you should go for this kind of durahold rug pads. These are beneficial for such flooring as they offer the protection and maintenance they require. The overall comfort of the house is also magnified. They can also assist in protecting your floors from liquids, dust and pressure. They are easy to clean and replace.
Rubber Non-Slip Padding For All The FloorsUltra-Non-slip-Rug-Pad-4-x-6-P11996891
Certain kind of rubber padding is positively suggested for all floors and rugs. These are rubber rug pads that have not undergone any kind of change. They are used on the basis of their original structure. They are left untreated and have no chemicals sprayed on them. They are, however, comparatively cheaper and suggested if you require rug pad for an entire room. They can also be used to pad welcome rugs and kitchen mats.
They are not specified for any particular floor. They can be used to protect cushion tiled, marbled, chipped and hardwood floors. They can easily provide you with the kind of padding you are looking for.
Therefore, if you want to cushion your house to protect your loved ones and your valuables, the above two are the finest shortlisted choices for you.

17003630961762575092

Why rubber rug pads are often a premium choice

Choosing a rug isn’t really that complicated, but there are several mistakes people tend to make when it comes to home décor and rugs. One of the biggest, and sometimes costliest, mistakes people do when choosing a rug is getting the wrong rug pad, either because they want to save money or don’t want to waste time on researching which rug pad is the right one for them. Using the free rug pad offered by your manufacturer instead of, say, a quality rubber rug pad, can have catastrophic effects on your carpet. In order for you to avoid these mistakes, read this article we have prepared for you and also make sure to keep them in mind when decorating your home.
When choosing the rug, you should know the appropriate size of it. A large rug needs a large rug pad which can, especially if it’s thick or made by quality natural rubber like many felt rubber pads are, often cost almost or even as much as the carpet itself. Moving on, look at the furniture in the room, and then make a decision of where you want to place the carpet. Furniture causes indentations so if your rug is underneath furniture, you need to protect your carpet with some dense rubber rug pads. The furniture should sit comfortably on the carpet, or at least with front legs of the furniture. This way, you can’t miss. Some of you may like area rugs, but if you are looking for smaller carpets, a rule of thumb you should stick to is to choose a carpet that is two feet smaller than the smallest wall of the room the carpet should go into. The thing a lot of people don’t keep in mind is just how much smaller carpets can slide, often potentially endangering the people walking over them, so you want to get a rug pad that offers great sliding protection, so you might want to stay away from fiber.

super-locknatural1optimized_7_5
Before you choose the wall color, you should choose the color of the rug and the furniture; otherwise, you will end up running around and searching for rugs and furniture with a paint color sample in your hand. So, the best option would be to choose the furniture, then find the rug, and after you are done with this, you should decide what color the walls should be.
The basic rule of thumb when choosing a rug is usually good for a living room. As for other rooms, there are several more tips you should read before choosing a rug and, consequently, the rug pads. Do your footsteps make a lot of noise, especially for the people in the room below? If the answer is yes, then you need a rug manufactured with sound insulation in mind. Rubber rug pads with a good deal of thickness usually get the job done. Kitchen rug pads shouldn’t be fiber to prevent water pouring through the carpet and making the rug pad rot. As for the bedroom, the bed is a very heavy piece of furniture, so as previously mentioned, you will probably want to get a rug pad as dense as possible. Rubber rug pads are some of the most dense rug pads available should you pick a type with a lot of density. The most common size of bedroom rugs is 8’x10’, but if you have a smaller bedroom, a 4’x6’ will also be good. If choosing the smaller rug, you should know it doesn’t go under the bed, of course, but in front of or next to it. Remember, a cohesive space begins with good proportions, so always make sure to pick a rug of a good size.

17003630961762575092

Natural rubber

Natural rubber

The Economist Intelligence Unit expects natural rubber (NR) consumption growth to continue expanding in 2014-15 at an average of 3.9% as demand recovers in several major consuming countries. This follows growth of 2.7% in 2013, according to the International Rubber Study Group (IRSG). Despite the quickening pace of consumption growth, it will not be enough to eliminate the substantial market surplus in 2014-15 and we expect that prices will favour consumers, especially in 2014. That said, heavy stockpiles in China and Japan will weigh against apparent demand as consumers there will be able to displace imports by drawing down on reserves. China will remain by far the world’s largest consumer in 2014-15, but other emerging regions, such as Other Europe, North America and Latin America, will also help to support consumption growth.

Supply

We have revised downwards our forecast for global rubber production in 2014 for a second consecutive month, as a combination of dry weather conditions across South-east Asia (where three-quarters of global rubber production is located) and low prices will result in lower output and production rationalisation. We now expect output to grow by just 0.1% in 2014, largely owing to a downward revision to our Thailand forecast, before bouncing back by 3.3% in 2015. Despite the weak growth in 2014, global rubber output will still reach a record 12.1m tonnes and will mean another year of sizeable market surplus. A notable further downside risk for 2014 is the deteriorating political situation in Thailand, given the potential for rubber farmers’ participation in recent social unrest to affect supply and for exchange-rate weakness to disrupt exports.

Stocks and prices

The net result of our increases in Japanese and North American consumption, and changes to the balance of production in South-East Asia is a slightly smaller market surplus in 2014, of 268,000 tonnes, compared with 294,000 tonnes previously, and 714,000 tonnes in 2013, according to according to IRSG data. The surplus will shrink again in 2015, as growth in global consumption will outpace that in production. (Producers will generally be wary of ramping up output following a period of good supply and falling global prices.) Even with these lower surplus levels, rubber will be amply available in 2014-15 and we expect the stocks/consumption ratio to stabilise above 14 weeks, its highest level since the early 2000s. Much of the excess rubber will be held in China by the State Reserve Bureau and will therefore be unavailable to the market, helping to temper somewhat the impact of the surplus on prices. There has also been stockbuilding at the producer end, as exporters are unwilling to flood the market at a time of low prices.

Despite a small reduction in the expected surplus in 2014 as a result of dry conditions in major producers and production rationalisation, recent bearish market conditions mean we have cut our forecasts for price for RSS3, a Thai benchmark grade used in automobile tyres. We now expect prices to average US$2,455/tonne, from US$2,498/tonne previously. Given the risks to the Thai economy posed by political unrest, it is possible that the price could fall further in US dollar terms on exchange-rate effects. Prices for SMR20, a Malaysian benchmark, are expected to average M$6,560/tonne in 2014 as a whole, down by nearly 16% on 2013 (when prices already fell by 18%). We tentatively expect prices to recover in 2015, but they will still be well off their high levels of 2011.

17003630961762575092

Glut In Natural Rubber Seen Shrinking

Glut In Natural Rubber Seen Shrinking As Prices Drop And China Car Sales Rise

Natural rubber supplies ballooned in recent years as Asian producers cranked up the tree taps and consumers curbed their demand. Now, the glut appears ready to pop. The global surplus is poised to shrink by nearly 50 percent in 2015 as the trends reverse, according to the International Rubber Study Group.

Rubber production will exceed demand by 202,000 metric tons next year, compared to 371,000 tons this year and 650,000 tons in 2013, the Singapore-based inter-governmental group confirmed to Bloomberg News. Actual inventories of rubber are still expected to grow.

Harvesting rubber, a $25 billion industry, is still a fairly low-tech business. Farmers cut through the tree’s bark — though not deep enough to slash the trunk — to access the milky white latex, which flows through a spout and drips into a bucket hanging off the tree. The rubber is primarily used to make automotive and airplane tires, and it also supplies the latex for surgical gloves and condoms. About 70 percent of the world’s supplies comes from Thailand, Indonesia and Malaysia, and most producers are small-scale farmers.

Three years ago, record-high rubber prices drove producers to ramp up their output. But as more product hit the market, China — the world’s top rubber buyer — experienced an economic slowdown, and new Chinese car sales dropped. The resulting rubber glut caused futures prices to drop 28 percent this year, hitting the lowest level in nearly five years in June, Bloomberg reported.

In response to low prices, producers are tempering their activity at the taps — all while China regains its automotive appetite.

Global vehicle production is slated to rise by 21 million units to 106 million units per year by 2021, with China making up half the growth, according to ISH Global Insight’s automotive forecasting arm. “If we turn the focus to China and emerging Asia we are bombarded by announcements that capacity will be increased,” Mark Fulthorpe, director of ISH’s global vehicle production forecasting, told CNBC this spring. About 70 percent of rubber consumed in China is used to make tires for lightweight vehicles.

The rubber surplus could shrink even further as some producing countries diminish their domestic industries.

In Thailand, the top grower and exporter of rubber, government officials want to replace about 8 percent of the country’s total rubber-growing area with more profitable oil palm trees, the Wall Street Journal reported last week. While rubber trees need about seven years to reach a rubber-tapping stage, oil palms can be harvested within three or four years of planting, giving them a quicker return. “Many farmers have already stopped tapping rubber trees as the returns are poor. Palm oil will provide better returns,” Pongsak Kerdvongbundit, managing director at Von Bundit Co., one of Thailand’s biggest rubber exporters, told WSJ.

Even so, total rubber inventories will jump to 4.33 million tons in 2015, about 15 percent more than 2014’s expected total and about 50 percent over 2013 amounts, The Rubber Economist Ltd. projects, Bloomberg noted.